An ISO 9001 Certified Company

Electro-Metrics has a position currently open for a Press Brake Operator

Job Summary:

The press brake operator will form parts from stock material in accordance with the layout and dimensions provided on the drawings accompanying the job traveller.  The operator must also verify part dimensions by measuring and inspecting parts.  Other job duties include deburring parts, inspecting parts, and keeping the press brake area clean and organized.

Essential Duties And Responsibilities:

  • Operate press brake.
  • Read and use measuring equipment.
  • Clean and deburr parts.
  • Assist at other operations as needed.
  • Keep area clean and organized.

Minimum Education/Work Experience:
High school diploma plus ability to read and interpret prints and drawings for layout and dimensioning.
5 years fabrication/machine shop experience.

Operate press brake and offer suggestions for process improvements.

You can  apply online now or please contact Human Resources at:
518-762-2600 ext. 0 or E-mail resume to:

231 Enterprise Road, Johnstown, New York 12095 *

Apply Now

Electro-Metrics has a position currently open for an Fab Production Foreman

Job Summary:

Responsible for all production schedules and manufacturing activities on the Fabricated Products production floor.

Essential Duties And Responsibilities:

  • Plans, develops, and establishes schedules to meet the shipment objectives of the business organization in accordance with management
  • Reviews material travelers to insure that there are no material shortages to complete production runs.
  • Schedules, and directs the activities of the employees under supervision.
  • Tracks progress of all jobs on the production floor to insure timely completion of jobs, thus insuring customer and internal delivery
    requirements are met.
  • Insures employees under supervision are fully and properly trained in the performance of tasks to be assigned to them.
  • Keeps up to date with new production techniques and improvements, and advises management on needs of periodic updated training for
    employees under supervision.
  • Evaluates performance of employees under supervision. Sets goals and objectives for personnel under supervision so as to improve
    performance and capabilities.
  • Recommends the purchase and update of equipment to insure efficient production and to enhance capabilities of the organization.

Minimum Education/Work Experience:
This position requires a candidate that communicates well with managers and subordinates. The person holding this position must accept detailed direction freely. A high school diploma and a minimum fives (5) years experience in the area of specialty fabrication and machining and two (2) years of lead experience is required. The ability to read and interpret drawings and prints in a must.


  • Has authority to schedule production jobs.
  • Has authority to assign personnel to jobs.
  • Has authority to review and critique performance of personnel under supervision.
  • Has authority to set goals and objectives for personnel under supervision.

You can  apply online now or please contact Human Resources at:
518-762-2600 ext. 0 or E-mail resume

231 Enterprise Road, Johnstown, New York 12095 *

Apply Now

Electro-Metrics has a position currently open for an Electronics Test Technician

Position Description:

Troubleshoot, Repair and Calibrate new production antennas, and electronic instruments as well as antennas and electronic instruments returned by customers for repair and re-calibration.

Major Responsibilities:

  • Test, calibrate and/or repair new production antennas and electronic instruments down to the component level.
  • Test, calibrate and/or repair customer’s antennas and electronic instruments equipment
  • Record specifications and make proper adjustments when necessary to required specifications
  • Work with Engineering, Production and Inventory Control to resolve manufacturing problems
  • Follow step by step alignment/calibration procedures
  • Proper handling of required documentation (work orders & data sheets)
  • Answer questions and/or train technicians on existing and new processes and calibration procedures

Main Requirements:

  • Two year technical school electronics training (AAS degree preferred)
  • 3+ years theory-based troubleshooting to component level preferred
  • Knowledge of RF and Microwave circuits

Technical Knowledge:

  • Knowledge of RF and Microwave circuits considered very valuable
  • Able to use and understand basic electronic test equipment
  • Able to study electronic schematics and understand principles of operation
  • Able to troubleshoot independently to the component level, locating manufacturing defects or defective components
  • Proficient in use of small hand tools (e.g., pliers, screwdrivers, nut drivers)
  • Able to use approved solder and unsoldering technique

Listed skills are important, however we are looking for a person with a willingness to learn, and the ability to work with our employees. The individual in this position must provide an outstanding attendance record, and understand the pride and responsibilities that come with producing the very highest quality parts and products.

If you are looking for a technician position, and you can fill the requirements,  apply online now or please contact Human Resources at:
518-762-2600 ext. 0 or E-mail resume to:

231 Enterprise Road, Johnstown, New York 12095 *

Apply Now

Electro-Metrics has a position currently open for a Machinist

Job Description:

Read, and interpret mechanical prints, and product parts from the prints.  Operate manual lathes in the production of high precision parts.  Inspect first articles and production run samples to engineering and customer specification documents.


Must have a working knowledge and experience in the operation of vertical and horizontal milling centers, and lathes.

  • Knowledge of setup of Mill/Turn tooking & materials for productions, including installation & removal of tools, and setting machine parameters
  • Ability to inspect & verify quality of machined parts using mechanical prints, calipers, and micrometers
  • Must have High School Diploma or GED
  • Must be able to lift at least 50 lbs
  • Must be proficient in speaking, reading, and writing in English
  • Any ability to operate and/or program CNC machines will be considered advantageous

A minimum of 3 years experience is required.  Electro-Metrics will provide some training for a person with some machining skills, that is willing to expand knowledge in the machining trades.

Electro-Metrics is an equal opportunity employer.  We offer competitive benefits including health and dental insurance as well as a 401(k) plan.

Applications will be accepted at our personnel office, you can apply online now or you may send a resume to Human Resources at:
Electro-Metrics  231 Enterprise Road, Johnstown, NY 12095

Apply Now